SAE AMS5561 Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing, 9.0Mn - 20Cr - 6.5Ni - 0
作者:标准资料网 时间:2024-05-15 12:58:51 浏览:9579
来源:标准资料网
Product Code:SAE AMS5561
Title:Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing, 9.0Mn - 20Cr - 6.5Ni - 0.28N, High-Pressure Hydraulic
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion and heat-resistant steel in the form of welded and drawn or seamless and drawntubing.
基本信息
标准名称: | 乳粉 硝酸盐、亚硝酸盐的测定 |
英文名称: | Milk powder-Determination of nitrate and nitrite contents |
中标分类: |
食品 >>
特种食品 >>
儿童食品 |
ICS分类: |
食品技术 >>
奶和奶制品 >>
奶及加工奶产品
|
替代情况: | 替代GB 5413-1985;被GB/T 5009.33-2008代替 |
发布部门: | 国家技术监督局 |
发布日期: | 1997-05-28 |
实施日期: | 1998-09-01 |
首发日期: | 1985-09-28 |
作废日期: | 2009-03-01 |
主管部门: | 国家标准化管理委员会 |
归口单位: | 全国食品工业标准化技术委员会 |
起草单位: | 国家乳制品质量监督检验中心 |
出版社: | 中国标准出版社 |
出版日期: | 1900-01-01 |
页数: | 7页 |
适用范围
本标准规定了采用镉还原和光度分析法测定硝酸盐和亚硝酸盐的方法。本标准适用于乳粉中硝酸盐和亚硝酸盐的测定。本方法检出极限分别为:硝酸盐1.5mg/kg;亚硝酸盐0.2mg/kg。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 食品 特种食品 儿童食品 食品技术 奶和奶制品 奶及加工奶产品
【英文标准名称】:QualityAssuranceRequirementsforNuclearFacilityApplicationswithAddenda
【原文标准名称】:核设备的质量保证要求
【标准号】:ASMENQA-1-2004
【标准状态】:作废
【国别】:美国
【发布日期】:2004-01-01
【实施或试行日期】:
【发布单位】:美国机械工程师协会(US-ASME)
【起草单位】:ASME
【标准类型】:()
【标准水平】:()
【中文主题词】:可靠度;操作;质量保证;核电厂;设计;定义;安全;安全要求;规范(验收)
【英文主题词】:Definition;Definitions;Design;Nuclearpowerplants;Operation;Qualityassurance;Reliability;Safety;Safetyrequirements;Specification(approval)
【摘要】:ThisStandardreflectsindustryexperienceandcurrentunderstandingofthequalityassurancerequirementsnecessarytoachievesafe,reliable,andefficientutilizationofnuclearenergy,andmanagementandprocessingofradioactivematerials.TheStandardfocusesontheachievementofresults,emphasizestheroleoftheindividualandlinemanagementintheachievementofquality,andfosterstheapplicationoftheserequirementsinamannerconsistentwiththerelativeimportanceoftheitemoractivity.ReportonbehalfoftheOwner;and(5)CertificationoftheLoadCapacityDataSheetonbehalfoftheNCertificateHolder.(b)forDivision2:(1)CertificationoftheDesignSpecificationonbehalfoftheOwner;(2)CertificationoftheConstructionSpecification,DesignDrawings,andDesignReportonbehalfoftheDesigner;and(3)ReviewoftheDesignReportonbehalfoftheOwner.Alsoprovidedarethedutiesofthesepersonnelintheperformanceoftheactivitiesdescribedabove.
【中国标准分类号】:F65
【国际标准分类号】:27_120_20
【页数】:228P.;A4
【正文语种】:英语